Double Hung Window Installation

Double Hung Window InstallationStep 1: Drill cavity for the male contact switch to seat in.

Step 2: Align Female Pod

Step 3: Attach 20 gauge solid core copper wire to contact lead on back of switch.

Step 4: Core Drill small hole for wire to fit through. **DONT hit glass with drill bit**

Step 5: Trim wire to size and low heat solder to film.

Step 6: Solder (low heat) NOT exceeding 400 degrees.

Step 7: Soldered and wired complete.

Step 8: Trim Kit InstallationClick the link here to purchase Smart Tint® Trim kit

Step 9: Acid Free neutral cure Silicone OnlyClick the link here to purchase Smart Tint® Siliconehttps://shop.smarttint.com/Smart-Tint-Neutral-Cure-Silicone-10oz_p_15719.html

FOR INDUSTRY NEWS CLICK HERE!